PRODUCTS
K-70 Specifications
| DNA | Single Ended Class A1 hybrid power amplifier with separate power supply. |
|---|---|
| Output power | Greater than 70W. Power delivery maximised for 3 to 7 ohm loads |
| Gain | 25.5dB SE in or balanced in, voltage mode.10V/mA in current mode. |
| Input impedance | 30K Ohms, Voltage mode, 50 ohms current mode. |
| Output impedance | Less than 0.07 ohms 20 Hz to 20Khz. |
| Signal to Noise Ratio | Greater than 115dB A weighted at nominal output.Greater then 97dB A weighted at 1W/8 ohms |
| Power response | Less than 5Hz to greater than 200KHz. |
| Power consumption | 1000 Watts at any volume into any load. |
| Size | 380mm wide, 256mm high, 550mm deep (each of 3 units) |
| Weight | Power supply: 40KgMono amps: 20Kg each |
| Operating environment | Operating temperature 0 to 35 degrees Celsius.Altitude sea level thru 3000m above sea level.Storage temperature –20 to +50 degrees Celsius. |
