sub_head.png
back.gif

bottan1.jpgbottan1.jpgbottan2.jpgbottan2.jpgbottan3.jpgbottan3.jpgbottan4.jpgbottan4.jpgbottan5.jpgbottan5.jpgbottan6.jpgbottan6.jpg

sub-spec.png


DNA
Single Ended Class A1 hybrid power amplifier with separate power supply.
Output power
Greater than 70W. Power delivery maximised for 3 to 7 ohm loads
Gain
25.5dB SE in or balanced in, voltage mode.
10V/mA in current mode.
Input impedance
30K Ohms, Voltage mode, 50 ohms current mode.
Output impedance
Less than 0.07 ohms 20 Hz to 20Khz.
Signal to Noise Ratio
Greater than 115dB A weighted at nominal output.
Greater then 97dB A weighted at 1W/8 ohms
Power response
Less than 5Hz to greater than 200KHz.
Power consumption
1000 Watts at any volume into any load.
Size
380mm wide, 256mm high, 550mm deep (each of 3 units)
Weight
Power supply: 40Kg
Mono amps: 20Kg each
Operating environment
Operating temperature 0 to 35 degrees Celsius.
Altitude sea level thru 3000m above sea level.
Storage temperature –20 to +50 degrees Celsius.